Installing, adjusting and testing CB antennas: How To Test The CB antennas

Testing the wheedle

With the heap expelled from the attractive base, associate one of your ohm meter tests to the focal point of the PL 259.
Associate the remaining lead to the focal point of the S0 239 that is situated on the attractive mount segment.
On the off chance that this shows coherence, the focal point of the link is working accurately.
Presently we're going to test the coaxial link shield, by touching one lead from your meter to the external piece of the PL 259.
Next move the remaining lead to the strung piece of the S0 239, situated on the attractive base.
On the off chance that you have coherence or a short this demonstrates the protected part of your cajole is working accurately.
Touch one of your meters prompts the focal point of the PL 259 connector.
Touch the other lead to the external strings on the S0239 or the external piece of the PL 259 connector.
In the event that this does not demonstrate congruity, the urge is not shorted out and is working accurately.

Expel the curl from the base and touch one test to the focal point of your PL 259.
Touch the other remaining test to the strings on your S0-239 connector or the outside of the PL-259.
Your meters ought to demonstrate no association. Before disengaging your tests, move the connector around and check for congruity.
On the off chance that despite everything you don't demonstrate any coherence, the PL-259 connector is in legitimate working request. In the event that you do show progression while moving your connector, you will need to introduce another one.