CB antenna SR-2K 10 & 11 Meter Center Loaded Antenna

Stryker Radios Are onr of the Best in 10 meter CB Antenna in the market Stryker SR-2K CB Antennas are rated high in efficiency, quality, and performance. Two different shaft lengths are included. The post CB antenna SR-2K 10 & 11 Meter Center Loaded Antenna appeared first on Stryker 10 Meter Radios.

For more details visit us at:
http://strykerradios.com/store/cb-antenna-sr-2k/

CB antenna SR-5K 10 & 11 Meter Center Loaded Antenna

 Stryker radios Are the One of the best ham radio dealers and CB Antennas dealers in the usa CB Antenna SR-5K is quality performing magnetic mount antenna which stryker amateur radio has produced. The post CB Antenna SR-5K 10 & 11 Meter Magnetic Mount appeared first on Stryker Amateur Radios.


For more details visit us at:


http://strykerradios.com/store/cb-antenna-sr-5k/

How do I send my radio in for warranty repair?

Go to Repairs.StrykerRadios.com and register for an account. After registering, enter the requested details regarding your radio. Your request will be reviewed by our staff and an RMA number will be issued via email. You will also receive emails during the repair process with status updates.

For more details visit us at:
http://www.strykerradios.com

How To Test The CB antennas

Testing the wheedle 

• With the heap expelled from the attractive base, associate one of your ohm meter tests to the focal point of the PL 259. 
• Associate the remaining lead to the focal point of the S0 239 that is situated on the attractive mount segment. 
• On the off chance that this shows coherence, the focal point of the link is working accurately. 
• Presently we're going to test the coaxial link shield, by touching one lead from your meter to the external piece of the PL 259. 
• Next move the remaining lead to the strung piece of the S0 239, situated on the attractive base. 
• On the off chance that you have coherence or a short this demonstrates the protected part of your cajole is working accurately.
• Touch one of your meters prompts the focal point of the PL 259 connector. 
• Touch the other lead to the external strings on the S0239 or the external piece of the PL 259 connector. 
• In the event that this does not demonstrate congruity, the urge is not shorted out and is working accurately.

Testing the PL-259 

• Expel the curl from the base and touch one test to the focal point of your PL 259. 
• Touch the other remaining test to the strings on your S0-239 connector or the outside of the PL-259. 
• Your meters ought to demonstrate no association. Before disengaging your tests, move the connector around and check for congruity.
• On the off chance that despite everything you don't demonstrate any coherence, the PL-259 connector is in legitimate working request. In the event that you do show progression while moving your connector, you will need to introduce another one.

Trouble Shooting The CB Antennas

On the Stryker SR-5K Cb Antennas the loop is a straightforward process.

• Unscrew the curl from the base
• Touch both of your volt-ohm meters prompts the middle stick on the base of the CB Antenna burden (curl).
• Move the remaining lead from your volt-ohm meter to the outside or strung part of the loop.
• In the event that your meter demonstrates a shorted association or coherence this shows, the curl is in great working request.

How to Adjust Cb Antennas

Modifying SWR 

Most attractive mount cb Antennas modify rapidly by moving the throw together or down, this normally includes relaxing maybe a couple set screws. On our CB Antenna SR-5K, for instance, there are two situated screws to release and afterward you can alter the tallness of the whip. It would be ideal if you remember that amid SWR alterations in case you're near to any structures they might unfavorably influence your readings. That being said its the best on the off chance that you can do as such in an open territory, for example, parking garage or field.

The principal step is to embed the chrome whip into your Cb Antenna until it bottoms out fix the set screws also. In next utilizing either an implicit meter on your radio or quality outer unit adjust and weigh your appraisal or in channel 1, 20 & 40. For these reasons however even a $12-$20 SWR meter will be more than precise.

In the event that your most reduced perusing is on channel 1, this shows the whip is too long and needs to be brought down or abbreviated. The exact inverse of that if the least SWR is on channel 40 the whip needs to be extended or raised up. On the off chance that you do find that trimming the whip is required, removed close to ¼" at once. Keep checking and modifying your SWR until you acquire a perusing of 1.5 over every one of the 40 channels. On the off chance that you find that your S WR is well over three on each of the 40 channels, there could be some kind of problem with reception apparatus or sweet talk, for example, an open or shorted association. Most radio wire makers have some offer data in respect to how to test the court will and in addition the sweet talk on their Cb Antennas

Installing CB Antennas

Introducing a CB Antenna can be a straightforward yet tedious procedure relying on the individual vehicle and model reception apparatus that you're introducing. We'll begin with the most effortless kind of Antenna to introduce the base stacked attractive mount simply like our Stryker Cb antenna SR-5K. 

The best place to introduce an attractive mount reception apparatus is in the focal point of the rooftop or if necessary middle of the storage compartment cover. Likewise keep the general leeway of your reception apparatus tip at the top of the priority list as you need to verify you're not hitting commute through signs or carport entryways, and so on. Once you've discovered the area where you're going to place the magnet, utilize a clean towel to evacuate any particles on the base of the attractive mount or your vehicle. Doing this will altogether diminish the chances of your auto or truck's paint being scratched. 

Directing your link 

Directing coaxial link is simplest in the event that you have a removable PL-259 toward one side of it as this will make going through little ranges much simpler. In case you're incidentally introducing the radio wire on your vehicle, you can basically course through the entryway jam being mindful so as not to harm the link and afterward directing to the range where your radio is. In the event that you observe that you have additional persuade, don't cut it or loop it firmly.